|
Post by babygeige on Apr 15, 2012 15:16:57 GMT -5
That looks like a really great option, but could it be a bit overkill for a 10 gallon? I see the smallest one is rated up to a 160 gallon tank, with recommended flow rate of 210 gph. Is it possible to adjust the amount of media and powerhead flow down far enough to not blow all the fish and shrimp around while still being effective?
|
|
|
Post by Carl on Apr 15, 2012 19:12:20 GMT -5
Overkill is the only problem.
The flow can be adjusted, but if adjusted too low the sand does not fluidize efficiently.
As a plus, if this flow rate or one within approximately 30%, this would be a viable option. Although he capacity is up to much larger thanks, this would not be an issue any more than a canister filter with a larger aquarium capacity too
Carl
|
|
|
Post by parker002 on Apr 16, 2012 5:52:55 GMT -5
Now that you've had this filter for a while, do you still like it? I've been thinking about replacing my 10 gallon's HOB filter. The little filter bags that they use have really cheapened in quality of late. I used to get a couple of months out of them, but now I'm lucky to get a month and I haven't really come up with any alternatives given the small size of the filter. I would probably look at the Nano 511. I still have mine and I actually like it a lot. It's a snap to clean - takes about 5 minutes. The sponges are high quality and show no signs of needing replaced. The only issues I've run into are: 1. The elbow on the outflow is made of some kind of pliable material, like rubber. It has SHRUNK. It won't stay attach to outflow tube by itself. I just wrapped it in teflon tape and I don't have anymore issues with it. 2. One time I turned the hose head assembly incorrectly (it turns and lock into place as opposed to having a lever or latch) and got it bound up. I had to take the whole head assembly apart and feared I was going to break something. I managed to get it loose with no apparent damage, however, and I just make sure to be careful now. I would recommend the Nano 511. It does a great job on the 14G and keeps it crystal clear, despite the snail problem. ![:)](//storage.proboards.com/forum/images/smiley/smiley.png) From what I've read, the 501 isn't big enough, even for a 10G.
|
|