|
Post by parker002 on Feb 13, 2011 18:13:47 GMT -5
As I tried (quite verbosely too ) to explain in *this thread* a while back, I had to use all of the adapters that came with my Filter Max #3's to get them to fit on the Aqueon intakes. You can go back and read the post if you want but I'll make it easier and post a diagram: I've decided I'm tired of my Filter Max #3 pre-filters sticking out into my tank. They take up alot of horizontal space that could be occupied by plants. Adding the 2nd elbow unfortunately isn't possible, even though it would be an easy fix, because it makes the intakes too long to fit into the tank. Which I guess leaves me with the option of using Teflon tape and trying to modify them somehow. I just don't if it's safe and I don't know if it would even work.
|
|
|
Post by parker002 on Feb 13, 2011 18:40:01 GMT -5
And of course, no sooner did I post this that I think I figured it out. I don't know why I never though of just turning the 2nd elbow OVER... Is there anything wrong with this? It results in the intake tube fitting into one of the large ribs in the side of the sponge but the sponge isn't pinched or anything - the sponge surface and intake tube surface are just flush against each other.
|
|
|
Post by Carl on Feb 14, 2011 10:18:51 GMT -5
Both your ideas look good to me.
As for Teflon tape, I have used it extensively for applications such as this as well as mixing with PVC cement to fix cracks in canister & other filters. I even use it to replace/repair O rings and replace rubber grommets for impellers (often quieting noisy impellers)
VERY HANDY PRODUCT IMO
Carl
|
|
|
Post by parker002 on Feb 14, 2011 10:52:59 GMT -5
The first one isn't an idea, it's actually how I had it. It just uses up so much horizontal space in the tank and now that I'm getting into aqua-scaping, that's valuable real estate. I really want to keep my filtration in the very back of the tank rather than sticking out 8 inches (the tank is only 13 inches from front to back).
I tried turning the intakes in their previous configuration but there's not enough clearance with the back of the tank and 1/3 of the sponge's surface area ends up smashed against the glass.
With them oriented vertically, I can turn them away from the glass but they don't take up anywhere near the horizontal space.
So far water movement appears to be completely unchanged so I guess I'm good to go.
|
|